cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2133
Views
15
Helpful
7
Replies

C9300 stack switch error after upgrade to IOS 16.6.3

Jhonadms
Level 1
Level 1

Hi All,

 

We are facing below error after the upgrade from 16.6.2 to 16.6.3.

 

*Oct  9 13:45:51.113: %IOSXE-3-PLATFORM: Switch 1 R0/0: kernel: FAT-fs (sda1): error, invalid access to FAT (entry 0x002009fa)

*Oct  9 13:45:51.113: %IOSXE-3-PLATFORM: Switch 1 R0/0: kernel: FAT-fs (sda1): error, invalid access to FAT (entry 0x002009fa)

 

BR

Jhon

4 Accepted Solutions

Accepted Solutions

Hi Jhon,

 

Can you revert back to the previous version and let us know if you're still facing this issue.

 

 

*** Please rate all helpful responses and mark solutions***

View solution in original post

Mark Malone
VIP Alumni
VIP Alumni
hi
Its a software issue in the kernal under the IOS-XE , you'll need to rollback or forward to avoid it
you could run the show tech through the analyzer or post it here to run or open it with TAC if you want the exact bug id

View solution in original post

Hi Jhon,

 

I am suspecting having the issue with the (kernel: FAT-fs (sda1) disk and its required RMA so don't waste the time and create RMA or open a TAC Case.

 

BR,

Tayyab

 

*** Please rate all helpful responses and mark solutions***

View solution in original post

@MUHAMMAD TAYYAB MUNIR@Mark Malone

 

Thank you for your prompt response and help.

 

 

View solution in original post

7 Replies 7

Hi Jhon,

 

Can you revert back to the previous version and let us know if you're still facing this issue.

 

 

*** Please rate all helpful responses and mark solutions***

Mark Malone
VIP Alumni
VIP Alumni
hi
Its a software issue in the kernal under the IOS-XE , you'll need to rollback or forward to avoid it
you could run the show tech through the analyzer or post it here to run or open it with TAC if you want the exact bug id

Hey @MUHAMMAD TAYYAB MUNIR@Mark Malone

 

I have revert back to previous OS and upgraded to another OS but same error message appearing continuously.

 

Jhon

Hi Jhon,

 

I am suspecting having the issue with the (kernel: FAT-fs (sda1) disk and its required RMA so don't waste the time and create RMA or open a TAC Case.

 

BR,

Tayyab

 

*** Please rate all helpful responses and mark solutions***

Do you have the device backed out to Cisco , something may have been damaged in the upgrade or else the bug could be in several versions
can you post the show tech or run it in the cli analzyer to see what it pulls back as an issue
It checks the hardware against known issues and bugs , you need to do that ir open a TAC case with Cisco get them to do it

@MUHAMMAD TAYYAB MUNIR@Mark Malone

 

Thank you for your prompt response and help.

 

 

Can you try upgrading to, say, 16.10.1?
If the issue is still ongoing after upgrading to 16.10.1 then raise a TAC Case. This could be a bug.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: