Can not connect to router

[curtis.w.williams]

Hello,

I am currently running into this problem when i try to connect to some new devices that were just installed.

xxx-xxx-xx#ssh -l (userid):139 xxx-xxx-xx

Password:

[Connection to xxx-xxx-xx closed by foreign host]

The device im connecting from is a 3745 router.

When i check the line interface everything looks in order

line 80 160

session-timeout 1440  output

login authentication admin-vty

terminal-type ANSI

no exec

transport preferred none

transport input telnet ssh

transport output all

stopbits 1

This problem persists even when ports are swapped, you are able to log 1 time into the device but after you leave it constantly gives you this error.

[Dan-Ciprian Cicioiu]

Hi ,

I belive that your issue here is "no exec" on the line . Remove this and retry.

Dan

[jimmysands73_2]

I thought the no exec-timeout option just set it not to timeout the vty lines?

Message was edited by: Jimmy Sands Looks like  Dans, reply was correct, here is an explanation: https://supportforums.cisco.com/thread/144449

[curtis.w.williams]

Thanks here is my VTY

line vty 0 4

exec-timeout 9 59

accounting commands 1 acct-cmd1

accounting commands 15 acct-cmd15

accounting exec acct-exec

login authentication admin-vty

transport input ssh

transport output all