Hi everyone!
I generated a 2048 key on a WS-C3560X-24P switch, but I can't SSH to it.
A sh ip ssh shows way less information than in the other switches that I have:
SSH Enabled - version 1.99
Authentication timeout: 120 secs; Authentication retries: 3
And when I debug SSH, this is what I get:
000212: Nov 25 16:09:38.767: SSH0: starting SSH control process
000213: Nov 25 16:09:38.767: SSH0: sent protocol version id SSH-1.99-Cisco-1.25
000214: Nov 25 16:09:38.767: SSH0: protocol version id is - SSH-1.99-Cisco-1.25
000215: Nov 25 16:09:38.767: SSH2 0: send: len 280 (includes padlen 4)
000216: Nov 25 16:09:38.767: SSH2 0: SSH2_MSG_KEXINIT sent
000217: Nov 25 16:09:38.776: SSH2 0: ssh_receive: 344 bytes received
000218: Nov 25 16:09:38.776: SSH2 0: input: packet len 344
000219: Nov 25 16:09:38.776: SSH2 0: partial packet 8, need 336, maclen 0
000220: Nov 25 16:09:38.776: SSH2 0: input: padlen 8
000221: Nov 25 16:09:38.776: SSH2 0: received packet type 20
000222: Nov 25 16:09:38.776: SSH2 0: SSH2_MSG_KEXINIT received
000223: Nov 25 16:09:38.776: SSH2: kex: client->server aes128-cbc hmac-sha1 none
000224: Nov 25 16:09:38.776: SSH2: kex: server->client aes128-cbc hmac-sha1 none
000225: Nov 25 16:09:38.776: SSH2 0: kex algo not supported: client diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1, server diffie-hellman-gr
000226: Nov 25 16:09:38.885: SSH0: Session disconnected - error 0x07
So everything seems to match, but the DG group.... But do you know where do I change that?
I mean, I just want a regular SSH connection... Standard, no options changed.
Thanks in advance!
