cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
701
Views
0
Helpful
12
Replies

cant wr or copy run start

robertkwild
Spotlight
Spotlight

hi all,

before on this switch (nexus 7000) i could do a "wr" or "copy run start" no problem but now i get this

wr
[########################################] 100%
Configuration update aborted: request was aborted

thanks,

rob

12 Replies 12

mmm.... but mine is

version 6.2(20)

and i have another nexus but that is letting me do a "wr" "copy run start"

robertkwild
Spotlight
Spotlight

here the logs when i try to do "wr"

%SYSMGR-3-CFGWRITE_SRVFAILED: Service "epld_auto" failed to store its configuration (error-id 0xFFFFFFFF).
%SYSMGR-2-CFGWRITE_ABORTED: Configuration copy aborted.
%SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id 0x401E0000).
%CMPPROXY-STANDBY-2-LOG_CMP_UP: Connectivity Management processor(on module 6) is now UP
%SYSMGR-2-GSYNC_SNAPSHOT_SRVFAILED: Service "epld_auto" on active supervisor failed to store its snapshot (error-id 0xFFFFFFFF).
%SYSMGR-2-STANDBY_BOOT_FAILED: Standby supervisor failed to boot up.
%PLATFORM-2-MOD_REMOVE: Module 6 removed (Serial number JAF1612ATAB)

Hello,

I checked for bugs, the below one is not exactly what you are experiencing, but try the suggested workaround:

Nexus7000 not able to save its config due to ipqosmgr error 0x41170008
CSCtj87129
Customer Visible
Notifications
Save Bug
Open Support Case
Description
Symptom:
A Nexus 7000 system may not be able to save its configuration and log the following
errors:

switch# copy r s
[################################## ] 83%
%SYSMGR-3-CFGWRITE_SRVFAILED: Service "ipqosmgr" failed to store its configuration (error-id 0x41170008).
[########################################] 100%
%SYSMGR-2-CFGWRITE_ABORTED: Configuration copy aborted.
Configuration update aborted: request was aborted
%SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id 0x401E0000).
switch#

switch# show system error-id 0x41170008
Error Facility: DDB Library
Error Description: Deleting a linked node

switch# show system error-id 0x401E0000
Error Facility: sysmgr
Error Description: request was aborted

Conditions:
Unknown

Workaround:
Steps tp recover:
1. Manually backup the current config
2. Erase the config with "write erase"
3. Reload the box
4. Manually restore the configuration

robertkwild
Spotlight
Spotlight

ok ive backup up the runing config to my tftp via this

copy running-config tftp:

how do i manually restore as i wouldnt be able to do this as i have "wr er" so when i reboot i couldnt even ssh as all my config is erased

copy tftp: running-config

 would i just console into the switch and literally copy/paste my backup config to the running config

Hello,

good question. I guess when they say 'manually restore' without specifying what exactly that means, they imply that you indeed console into the switch and configure basic connectivity to (in your case) TFTP server, then get the full config from there...

robertkwild
Spotlight
Spotlight

so basically configure the bare min to get tftp working ie configure vlan, vlan ip, interface port ie make it access so i can copy the running config back to it?

Hello,

exactly. That is how I interpret 'manually restore'. The idea is, obviously, that you do this only once, and afterwards, you can save the config normally...

so when i do a 

copy run tftp

wr erase

reload

when it reloads will it be set to factory

robertkwild
Spotlight
Spotlight

my worry is when i do a reload it wont come back good ie it will go in a loop as it wont find boot file?

Hello,

in theory it should load to factory defaults...

That said, what (if you have not tried that before) happens if you just reboot the Nexus, with the current config ? Maybe the problem solves itself that way as well...

robertkwild
Spotlight
Spotlight

yes thanks just reload the switch first to see if solves, will do, let you know, wont be straight away as got to go higher up the ranks to do this

Review Cisco Networking for a $25 gift card