08-17-2013 02:46 PM - edited 03-07-2019 02:59 PM
Hello team:
The config guide says that you must choose and configure at least one interface (max of 4) on which DAD fast-hello is to be activated. Example:
Router(config)# interface fastethernet 1/2/40
Router(config-if)# dual-active fast-hello
Let´s suppose that this interface is connected to fastethernet 2/2/40 (on the other switch). ¿Do I need to configure the same previous command on the peer interface?
Your kind help will be greatly appreciated
TIA, Rogelio
Solved! Go to Solution.
08-17-2013 03:26 PM
Hi,
Let´s suppose that this interface is connected to fastethernet 2/2/40 (on the other switch). ¿Do I need to configure the same previous command on the peer interface?
Absolutely, "dual-active fast-hello" command must be configured on both switches.
HTH
08-17-2013 06:31 PM
Hi there.
I would do at least two ports as recommended and if possible use different blade between the two chassis in case if hardware issues.
Sent from Cisco Technical Support iPhone App
08-17-2013 03:26 PM
Hi,
Let´s suppose that this interface is connected to fastethernet 2/2/40 (on the other switch). ¿Do I need to configure the same previous command on the peer interface?
Absolutely, "dual-active fast-hello" command must be configured on both switches.
HTH
08-19-2013 04:49 AM
Hi Reza:
I am Rogelio from someone else´s account. I am not being able to sign in with my username/password; I requested the password to be reset, but I can not reach the sign on system to make my password be changed.
Thank you very much for your kind answer.
Rogelio
08-19-2013 08:49 AM
Hi Rogelio,
Please rate and mark the post as answered, so others can benefit from it.
Thanks,
Reza
08-17-2013 06:31 PM
Hi there.
I would do at least two ports as recommended and if possible use different blade between the two chassis in case if hardware issues.
Sent from Cisco Technical Support iPhone App
08-19-2013 04:49 AM
Hi Simon:
I am Rogelio from someone else´s account. I am not being able to sign in with my username/password; I requested the password to be reset, but I can not reach the sign on system to make my password be changed.
Thank you very much for your kind answer.
Rogelio
08-19-2013 04:54 AM
Hi Rogeilo.
Not a problem!
If you found the answer useful then please rate it
:)
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide