05-24-2008 12:26 PM - edited 03-05-2019 11:12 PM
Does a catalyst switch running ios version 12.0(5) support running a vtp domain configuration. Where vtp clients receive updates from the vtp server? If so can someone help me with the Syntax?
Thank you,
David
05-24-2008 09:20 PM
David,
Go over this link, provides all necesary syntax for configuring vtp server, vtp clients.
05-25-2008 10:14 AM
Thanks to everyone for the responses! I think this article had the most information though. My problem was I was trying to find the configuration and syntax from global configuration mode. Thanks for the info jorgemcse.
David
05-25-2008 03:55 AM
Hello,
take care of the different limit in the number of vlans supported that exist on different platforms.
If your c2924 can support only 128 vlans (for example) and more vlans exist in your vtp domain the c2924 will automatically changes its mode to vtp transparent to protect itself.
I've experienced this problem some years ago.
hope to help
Giuseppe
05-25-2008 04:33 AM
Well,
To get the advantages of VTP you need to have one switch acting as VTP server.
lets say, you got two switch A and B.
lets make Switch A as VTP server and select domain name for the VTP.
Swtich-A(config)# vtp mode server
Swtich-A(config)# vtp domain jahil
You can create vlans on server A those you want to replicate with rest of the domain.
On switch B you have to configure vtp mode. If you want to replicate you need to set vtp mode CLIENT or SERVER. If you don't want to participate in VTP domain set it to transparent.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide