Catalyst 3560 V2

[davidm]

So, We've just received two new catalyst 3560V2 switches and either I've lost my mind or the IOS has had some changes...

Line VTY 0 4

     Login Local

command does not work.  So, I downloaded a new IOS

c3560-ipservicesk9-tar.150-1.SE2

and still no luck...

Have I lost it or does the IOS no longer support it?

Here is currect Console and VTY lines running on a different 3560 switch...

!

line con 0

privilege level 15

password 7 152B29025438262524

login local

line vty 0 4

access-class 99 in

privilege level 15

password 7 152B29025438262524

login local

line vty 5 15

access-class 99 in

privilege level 15

password 7 012A240A0B190B0E2D

login local

!

[sachinraja]

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/15.0_1_se/configuration/guide/swauthen.html#wp1046352

The config guide does give "login local" as a supported command.. what do you see after going to line vty 0 4 ? can you give a  ? after login to see the options ?

[Nandan Mathure]

Do you have "aaa new-model" configured? that might be causing it or check if local username password needs to be created first etc.

Nandan Mathure

[siddhartham · Accepted solution]

its most likely the aaa new-model config