08-22-2023 10:21 AM
Hello,
What is the procedure to replace faulty CBS350 stack member (keeping settings of that stack member)?
08-22-2023 10:39 AM
Tis should be a simple procedure as long as the new switch have the same firmware version as the other members. I believe on this link you have all the information you need and some troubleshooting steps in case you need it
08-22-2023 10:40 AM
it should be straight forward as per i know.
i follow below steps :
1. take the configuration backup out of the box
2. upgrade the new switch with right firmware as the Live one
3. remove the OLD Switch (failed one from rack,) install new replaced switch
4. connect the cables and power on and check
below guides help you :
08-23-2023 08:52 AM
thanks to both of you. It was simple indeed. I replaced the switch and added to the stack with ID of failed one. All config was preserved.
08-23-2023 11:54 PM
glad we are helpful - we mark as resolved now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide