CBS350-24T-4X replace stack member

[mirko.veselic]

Hello,

What is the procedure to replace faulty CBS350 stack member (keeping settings of that stack member)? 

[Flavio Miranda]

Hi @mirko.veselic 

 Tis should be a simple procedure as long as the new switch have the same firmware version as the other members. I believe on this link you have all the information you need and some troubleshooting steps in case you need it

https://www.cisco.com/c/en/us/support/docs/smb/switches/Cisco-Business-Switching/kmgmt-3006-troubleshoot-adding-to-existing-stack-cbs.html

[balaji.bandi]

it should be straight forward as per i know.

i follow below steps :

1. take the configuration backup out of the box

2. upgrade the new switch with right firmware as the Live one

3. remove the OLD Switch (failed one from rack,) install new replaced switch

4. connect the cables and power on and check

below guides help you :

https://www.cisco.com/c/en/us/support/docs/smb/switches/Cisco-Business-Switching/kmgmt2836-Stacking-Guidelines-for-CBS.html

https://www.cisco.com/c/en/us/support/docs/smb/switches/Cisco-Business-Switching/2899-2544-stack-settings-cbs-switch.html

[mirko.veselic]

thanks to both of you. It was simple indeed. I replaced the switch and added to the stack with ID of failed one. All config was preserved.

[balaji.bandi]

glad we are helpful - we mark as resolved now.