cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1079
Views
0
Helpful
3
Replies

change carrier-delay Nexus 3064

santox
Level 1
Level 1

Hi, I have a Nexus 3064 version 6.0(2)U6(7)  where I connected a L2 protected.

When I have a fiber cut, provider switch automatically to backup line withouth problem. When master is going up, they cant switch to the master because flap of Nexus port is <50ms.

They tell me to

"be able to advise how to increase “carrier-delay down” time on your ports in order to not send LOS during protection switch (sub 50ms flaps)."

I try to find something on the internet but I cant.

Someone can help me to try a way to fix this?

have a nice day

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame
"be able to advise how to increase “carrier-delay down” time on your ports in order to not send LOS during protection switch (sub 50ms flaps)."

You need to change carrier delay so networkl will co-up with suggestions :

 

look at the config :  ( nexus 7K, same config works on nexus 3K)

 

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/interfaces/configuration/guide/b-Cisco-Nexus-7000-Series-NX-OS-Interfaces-Configuration-Guide-Book/configuring-basic-interface-parameters.html#concept_28B89D703CF64255A8022A2C645E90E9

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

ok man I will try this config.

Provider tells me that I must do the change in phisical port and not in vlan so I dont try this command.

Now I do a test and let u know.

Thank you again and have a nice day

 

Hi we try but doesnt work

Nexus port send LOS in case of sub 50ms service flaps so this command doest have effect on it.