01-11-2011 10:01 AM - edited 03-06-2019 02:55 PM
I purchased 2 Cisco2650 (non MX version) from Ebay and to my surprise has IOS 12.4 (12) installed on both. I thought only the XM versions of 2600 series could support 12.4 and non-MX 12.3.
Is the Cisco2650 actually 2650MX (It does not show/say MX anywhere on the device, just Cisco2650).
01-11-2011 12:17 PM
For a true 2650 router 12.3.26 was the last version that was released . A show version will tell you if its a XM or not otherwise they have the wrong IOS on it .
01-11-2011 12:26 PM
Thats interesting, When I get home I will run and see. Thank you.
I didn't even know it would allow you to put 12.4 on a device that maxes out at 12.3. Do your forsee any issues of keeping it this way?
01-11-2011 09:31 PM
Cisco2650-1>sh ver
Cisco IOS Software, C2600 Software (C2600-IPBASEK9-M), Version 12.4(12), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 17-Nov-06 11:18 by prod_rel_team
ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Cisco2650-1 uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c2600-ipbasek9-mz.124-12.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 2650 (MPC860P) processor (revision 2.0) with 127627K/3445K bytes of memory.
Processor board ID JAB05310D2F
M860 processor: part number 5, mask 2
1 FastEthernet interface
2 Low-speed serial(sync/async) interfaces
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide