Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Working on a Cisco Lab and had a question. Would it be possable to connect 3 routers total using 3 NM-4T-IMA cards. Router 2 and Router 3 connecting to Router 1. Router 2 and 3 would only use 2 T1 lines each connecting them both to Router 1. Is this ...
I am having a litle confution on 2 pieces of equipment and there compatability to one another. I am currently in the process of learing for my CCNA which I am sure this info is elementry to most.After some research I understand the nm-4T1 ATM card is...
I am currently studying for my CCNA and during a CBT Nugget video it mentions Spanning-Tree is really only effective to around 4-5 daisy chained switches. I am wondering if this is the case and to what extent would spanning tree not be viable to use?...
So working to get my CCNA and have a home lab created. (Please view PDF/Configs) I am using RIP v2 routing on all links. Now the main switch is not Cisco its a linksys home router basically connected to the WAN and using it as a dumb switch via built...
Thanks for your guidance, I believe I have found what I am looking for. I am unable ot locate OLD-CISCO-TS-MIB::tslineSesDir but using OLD-CISCO-TS-MIB::tsLineActive 18-22 by adding those 5 lines up will effectivly show me attached users via telnet. ...
Ill be happy to help, 6 months ago I was in the same boat you are in!First you need to make a loopback address, on mine I did 10.0.0.1 though it can be anything you want:interface Loopback0 ip address 10.0.0.1 255.255.255.255Make sure under your tty ...
When you say correct cables, do both technologies use T1 corssover (via Cat5e/6) or are they diffrent cord configurations? For study and common day relavence is ATM used in todays world anymore? Is it worh implemeting it in my Lab? I wanted to get mo...
HA Figured it out (^_^)Cisco3640#^^xAccess_Server#[Resuming connection 1 to cisco3640 ... ]disconnectdisconnect% No current connectionCisco3640#^^xAccess_Server#[Resuming connection 1 to cisco3640 ... ]clear line 1clear line 1% Line 1 not available f...
