07-06-2018 09:36 AM - edited 03-08-2019 03:35 PM
Hi Everyone
I wanted to know is there a chart someone on Cisco that I can look at to tell me what is the difference between these 2 switches that I have. They both are 2960X series, they both are 48 ports but they have different numbers. One is a LPD-L and the other is a FPS-L, I want to know what these letters mean because I would like to standardize what we have so the next time I order one I tell the vendor the exact model number.
Eric
Solved! Go to Solution.
07-06-2018 10:23 AM
It has to do with POE. One is Low Power 370w the Other is Full Power 740w.
07-06-2018 10:48 AM
LPD can be broken down as:
P stands for PoE with 370w PoE allowance
D stands for SFP/SFP+ support
FPS can be broken down as
FP means Full PoE power. This can only be found in 48-port switches. This means there is a power supply which supply 750w PoE.
S means SFP only support
07-06-2018 10:23 AM
It has to do with POE. One is Low Power 370w the Other is Full Power 740w.
07-06-2018 10:48 AM
LPD can be broken down as:
P stands for PoE with 370w PoE allowance
D stands for SFP/SFP+ support
FPS can be broken down as
FP means Full PoE power. This can only be found in 48-port switches. This means there is a power supply which supply 750w PoE.
S means SFP only support
07-06-2018 11:04 AM
What you just explained is what I want to know, is there a chart that will show you what these letters mean.
07-06-2018 11:07 AM
07-06-2018 11:10 AM
Yes
I like how you explained what each letter stands for and thanks alot
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide