07-18-2022 10:42 AM
ISP Router:
WAN: to the Internet
LAN1Port: 192.168.200.1 >> Connected to pfSense WAN Port
pfSense WAN Port connected to Router LAN1Port 192.168.200.1
pfSense LAN Port Connected to Switch on Gi0/24
pfSennse has 3 vLANs
vLan1 Default 192.168.101.2 DHCP Range (192.168.101.100 - 192.168.101.200)
vLan2 HR 192.168.102.2 DHCP Range (192.168.102.100 - 192.168.102.200)
vLan3 Sales 192.168.103.2 DHCP Range (192.168.103.100 - 192.168.103.200)
Cisco C3750 switch has 3 vLANs
vLan1 Default 192.168.101.0 Gi0/1 Switchmode Access
vLan2 HR 192.168.102.0 Gi0/2 – 10 Switchmode Access
vLan3 Sales 192.168.103.0 Gi0/11 – 22 Switchmode Access
Gi/0/24 Switchmode Trunk
Internet working on vLAN1 Gi0/1 but not on any other port!
If I move ports from other vLANs to vLAN1 then internet works on those ports!
PCs on vLan2 and vLan3 are getting respective IP / DNS addresses (from pfSense DHCP) but not reaching to the Internet.
What should I do to enable the internet on other ports / vLANs on PCs connected to Cisco Switch?
Will appreciate any help / directions.
Thanks
07-18-2022 11:25 AM - edited 07-18-2022 12:19 PM
ping 8.8.8.8 is it success ?
ping google.com is it success ?
note:-do ping from PC
You need dynamic NAT in ISP router If I am right.
dynamic NAT include all prefix in pfsence.
07-18-2022 12:46 PM
Post-show run from Switch
also refer below document how to setup : (I am thinking routing or NAT issue)
07-19-2022 12:25 AM
Simply you have to add VLANs on the PFsense Lan interface.
below tutorial will help you how to add vlans on the interface.
07-19-2022 12:39 AM
do you have gateway in your vlans except vlan1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide