cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
202
Views
0
Helpful
2
Replies

Cisco 3750-X upgrade problem

athraya
Beginner
Beginner

Hi , 

I try to upgrade a C3750-X 24S with tar archive , switch seems hang to "Extracting image from archive into flash....."

here the log :

FiberSW#dir flash:
Directory of flash:/

2 -rwx 796 Mar 5 1993 15:48:56 +00:00 vlan.dat
4 -rwx 18586368 Jan 1 1970 01:01:34 +00:00 c3750e-universalk9-mz.150-1.SE.bin
587 -rwx 1912 Mar 1 1993 00:01:50 +00:00 private-config.text
589 -rwx 3096 Mar 1 1993 00:01:50 +00:00 multiple-fs
588 -rwx 2213 Mar 1 1993 00:01:50 +00:00 config.text

119144448 bytes total (100495360 bytes free)
FiberSW#$ture-upgrade tftp://192.168.1.2/c3750e-universalk9-tar.152-4.E10.tar
Loading c3750e-universalk9-tar.152-4.E10.tar from 192.168.1.2 (via FastEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 30720000 bytes]

Loading c3750e-universalk9-tar.152-4.E10.tar from 192.168.1.2 (via FastEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
examining image...
extracting info (109 bytes)
extracting c3750e-universalk9-mz.152-4.E10/info (540 bytes)
extracting info (109 bytes)

Stacking Version Number: 1.59

System Type: 0x00000002
Ios Image File Size: 0x01860200
Total Image File Size: 0x01D49A00
Minimum Dram required: 0x08000000
Image Suffix: universalk9-152-4.E10
Image Directory: c3750e-universalk9-mz.152-4.E10
Image Name: c3750e-universalk9-mz.152-4.E10.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
FRU Module Version: 03.08.10.WAL

Old image for switch 1: unknown

Extracting images from archive into flash...

I wait long time, without any change. Also I try different image , delete update folder etc.. same thing

Thank 's for help

1 Accepted Solution

Accepted Solutions

amikat
Rising star
Rising star

Hi,

Please be aware that it can take around 10 - 15 minutes between "Extracting images from archive into flash..." and the next output message.

Best regards,

Antonin

View solution in original post

2 Replies 2

marce1000
VIP Mentor VIP Mentor
VIP Mentor

 

    - Check logs on the switch after trying , 

 M.

amikat
Rising star
Rising star

Hi,

Please be aware that it can take around 10 - 15 minutes between "Extracting images from archive into flash..." and the next output message.

Best regards,

Antonin

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers