06-30-2016 04:35 AM - edited 03-08-2019 06:26 AM
Hi All,
I want your help to know if Cisco 4500 supervisor engine II-Plus-10GE WS-X4013+10GE 10G supports any type of 10G line cards or we have to upgrade the supervisor engine.
Thank you in advance
Solved! Go to Solution.
06-30-2016 03:55 PM
WS-X4013+10GE can't support 10 Gbps line card except the on-board ones.
If you've got a WS-X4013+10GE line card, then there's a chance the chassis is legacy too. Talk to authorized Cisco reseller or Cisco AM/SE because there's a bundle which includes a 4510R+E and Sup8E, one power supply.
06-30-2016 03:55 PM
WS-X4013+10GE can't support 10 Gbps line card except the on-board ones.
If you've got a WS-X4013+10GE line card, then there's a chance the chassis is legacy too. Talk to authorized Cisco reseller or Cisco AM/SE because there's a bundle which includes a 4510R+E and Sup8E, one power supply.
07-01-2016 12:35 AM
Thank you Leo for your answer.
I tried to rate it 5 but by mistake it is 1 !. i tried to correct it but unfortunately was not able to edit it again.
07-01-2016 12:50 AM
Thanks for taking the time to rate our posts. (It's a "5".)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide