06-15-2021 01:00 PM
HI team
Cisco 9407 series configured with VSS in switches every thing working fine.
we configured nearly 10 port channels, in some port channel configuration automatically showing lacp max-bundle 4
please explain ???
interface Port-channel 100
description ***delmonte***
switchport access vlan 10
switchport mode access
lacp max-bundle 4
and some other port also please explain :
Ap1/3/0/1
Ap1/3/0/1
Gi0/0 |
Solved! Go to Solution.
06-15-2021 01:39 PM
"lacp max-bundle 4" is just stating the number of physical interfaces you can add to that Portchannel. You can always change that or delete it.
see link:
As for Ap1/3/0/1
That is because most likely your sup is also a Wi-fi controller.
HTH
06-15-2021 01:33 PM
Hi Kick534,
LACP will bundle up to 8 ports (active) what you are configuring with ""lacp max-bundle 4" is that each of your port-channels will allow up to 4 physical ports to form the port-channel.
Hope this helps!
Jaime Saldaña
Cisco Systems
06-15-2021 01:39 PM
"lacp max-bundle 4" is just stating the number of physical interfaces you can add to that Portchannel. You can always change that or delete it.
see link:
As for Ap1/3/0/1
That is because most likely your sup is also a Wi-fi controller.
HTH
06-15-2021 02:19 PM
Can you post associated interface config for the PO 100
Ap1/3/0/1 Ap1/3/0/1 Gi0/0
these are APP hosting interface, you can host application inside 9400
06-15-2021 10:10 PM
we not configured any port channel for below ports
Ap1/3/0/1 Ap1/3/0/1 Gi0/0
by default above port showing in configuration, can you provide any document for it,
and for what purpose we will use gi0/0.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide