07-06-2018 12:52 PM - edited 03-08-2019 03:36 PM
I am having some issues getting my guest VLAN to route through my Cisco ASA.
I've got port 4 setup with the IP of 192.168.100.1 and I want to use an IP in our public IP subnet of (example) 5.4.3.2/26
I've got my switch setup to handle DHCP for the Guest VLAN and I'm using a ruckus controller.
So port 4 on the ASA is the only used for Guest VLAN 5. I can ping from a device connected on the wireless network 192.168.100.1 so I know traffic is getting to the ASA I'm assuming my NAT is setup wrong.
Any advice on how to get this working correctly?
Thank you
Solved! Go to Solution.
07-06-2018 01:13 PM
07-06-2018 01:13 PM
Hello,
post the full configuration of your ASA...
07-06-2018 02:16 PM
Hello,
I don't see the attachment ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide