10-09-2014 01:47 AM - edited 03-07-2019 09:02 PM
Hi guys,
i wanted to activate auto-qos on my LAN, but when i get to the C4500 i find that the command auto .... is not accepted
Sh Version :
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.05.03.E RELEASE SOFTWARE (fc1)
is it due to my version ?? i want a confirmation !!
Thanks;;
10-09-2014 07:45 AM
10-09-2014 09:42 AM
so im dead, is there any solution so it can support the auto-qos??
thanks please
10-09-2014 01:16 PM
Oussama,
If you can provide a complete "show version", that will help more.
Starting with Cisco Release XE 3.3.0(SG) and 15.1(1)SG, the Catalyst 4500 Series Switch supports the "auto qos srnd4" command.
Kind regards,
Ed
10-10-2014 09:12 AM
10-10-2014 09:29 AM
Thank you Oussama,
Due to Auto Qos having 'set' commands ip routing will need to be enabled globally on the
switch. Have you enabled IP routing globally?
Kind regards,
Ed.
10-10-2014 10:11 AM
yes it is enabled, so what the problem then check this :
CEG01-SWF-1(config)#interface g2/1
CEG01-SWF-1(config-if)#au
CEG01-SWF-1(config-if)#aut
CEG01-SWF-1(config-if)#auto
CEG01-SWF-1(config-if)#auto?
% Unrecognized command
CEG01-SWF-1(config-if)#auto
10-09-2014 02:52 PM
switch(config)#int g1/1
switch(config-if)#auto ?
qos Configure AutoQoS
switch(config-if)#auto qos ?
classify Configure classification for untrusted devices
trust Trust the DSCP/CoS marking
video Configure AutoQoS for video devices
voip Configure AutoQoS for VoIP
Its there. I am on a 4510 with WS-X45-SUP8-E running Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSAL-M), Version 03.03.01.XO RELEASE SOFTWARE
10-10-2014 09:14 AM
hi ubhen,
here you go
CEG01-SWF-1(config)#interface g2/1
CEG01-SWF-1(config-if)#au
CEG01-SWF-1(config-if)#aut
CEG01-SWF-1(config-if)#auto
CEG01-SWF-1(config-if)#auto?
% Unrecognized command
CEG01-SWF-1(config-if)#auto
i did it on my switch , i dont understand
10-10-2014 09:29 AM
i have a c4506-E with a supervisor : WS-X45-SUP7L-E
:)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide