02-16-2014 04:19 AM - edited 03-07-2019 06:14 PM
hi all,
I have cisco catalyst WS-C4507R with suoervisor (WS-X4515) with IOS (cat4000-I9K91S-M) I need to upgrade it to the latest IOS (150)
when I download the IOS from cisco site and copied it on the bootflash: and force it to boot from this image (this displayed in the output of show bootvar)
I reboot the box then when started up I found that it not booted from the required IOS and boot from the old IOS.
any help please
02-16-2014 07:35 AM
Hi,
First check with "sh boot" command, most likely the old version is still in the boot variable.
Than deleted the old boot variable command and than add the new one, save and reboot.
no system bootflash
system bootflash
HTH
02-16-2014 11:49 AM
I checked show bootvar, I found that the next boot will be from the version 150 and after I reload the switch I found it still not boot from the required version ??
what may be the problem ???
02-16-2014 12:43 PM
Did you actually try these command?
no system bootflash
system bootflash
wr
reload
02-16-2014 12:55 PM
yeah
I tried these command more than one time and the result is the same ??
02-16-2014 05:35 PM
Can you post the output of "show ver"?
02-17-2014 09:04 AM
Dear Reza,
I solved the problem
thanks alot for your kindly support.
the problem history:
-from the release note of the IOS it was neccessary to upgrade the ROMMON IOS to another version.
-config-register was 0x2101 I changed it to 0x2102
-upgrade the IOS
it upgraded successfully
I appreciate you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide