04-23-2018 04:28 AM - edited 03-08-2019 02:45 PM
I HAVE SWITCH which is in rommon mode i can't do anything please help me
tell me how to upload ios through rommon mode
or which is the best way to upload ios fast still my switch 6509 in rommon mode i can,t do anything
and how to boot it still not image in the dir bootflash:
please help me urgent thanks.
04-23-2018 04:40 AM
04-23-2018 05:05 AM
i already in console when i power of and then on looks like this errors
shutdown
% Incomplete command.
interface GigabitEthernet9/8
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/9
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/10
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/11
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/12
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/13
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/14
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/15
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/16
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/17
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/18
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/19
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/20
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/21
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/22
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/23
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/24
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/25
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/26
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/27
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/28
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/29
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/30
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/31
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/32
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/33
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/34
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/35
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/36
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/37
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/38
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/39
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/40
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/41
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/42
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/43
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/44
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/45
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/46
^
% Invalid input detected at '^' marker.
no ip address
% Incomplete command.
shutdown
% Incomplete command.
interface GigabitEthernet9/47
^
% Invalid input detected at '^' marker.
description NETSM45P-EDC093673
^
% Invalid input detected at '^' marker.
switchport
^
% Invalid input detected at '^' marker.
switchport access vlan 110
^
% Invalid input detected at '^' marker.
switchport mode access
^
% Invalid input detected at '^' marker.
speed 1000
^
% Invalid input detected at '^' marker.
duplex full
^
% Invalid input detected at '^' marker.
spanning-tree portfast edge trunk
^
% Invalid input detected at '^' marker.
interface GigabitEthernet9/48
^
% Invalid input detected at '^' marker.
description HNAS-EDC95184
^
% Invalid input detected at '^' marker.
switchport
^
% Invalid input detected at '^' marker.
switchport trunk encapsulation dot1q
^
% Invalid input detected at '^' marker.
switchport trunk allowed vlan 110,120,130,150
^
% Invalid input detected at '^' marker.
switchport mode trunk
^
% Invalid input detected at '^' marker.
switchport nonegotiate
^
% Invalid input detected at '^' marker.
speed 1000
^
% Invalid input detected at '^' marker.
duplex full
^
% Invalid input detected at '^' marker.
no cdp enable
^
% Invalid input detected at '^' marker.
spanning-tree portfast edge trunk
^
% Invalid input detected at '^' marker.
%NTP: unreasonable value
SETUP: new interface GigabitEthernet3/1 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/2 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/3 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/4 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/5 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/6 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/7 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/8 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/9 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/10 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/11 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/12 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/13 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/14 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/15 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/16 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/17 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/18 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/19 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/20 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/21 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/22 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/23 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/24 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/25 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/26 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/27 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/28 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/29 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/30 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/31 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/32 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/33 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/34 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/35 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/36 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/37 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/38 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/39 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/40 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/41 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/42 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/43 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/44 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/45 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/46 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/47 placed in "shutdown" state
SETUP: new interface GigabitEthernet3/48 placed in "shutdown" state
System Bootstrap, Version 8.5(3)
Copyright (c) 1994-2008 by cisco Systems, Inc.
Testing lower main memory - data equals address
Testing lower main memory - checkerboard
Testing lower main memory - inverse checkerboard
Clearing lower memory for cache initialization
Clearing bss
Clearing autoboot state machine
melody_present_reg: 1st read w/ 0x5555
melody_present_reg: 2nd read w/ 0xaaaa, reversed: 0x5555
Bootdisk adapter is detected, enabling bootdisk access...
Reprogramming CS1 w/ Melody value...
Reading monitor variables from NVRAM
Reset reason for CPU board 0xffff , BaseBoard 0x280ffff, display 0x20000System Reset by Software.
Enabling interrupts
Initializing TLB
Initializing cache
Initializing required TLB entries
Initializing main memory
Sizing NVRAM
Initializing PCMCIA controller
Exiting init
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
rommon 1 >
after they on rommon mode
04-23-2018 01:18 PM
@salman Baig wrote:
Reset reason for CPU board 0xffff , BaseBoard 0x280ffff, display 0x20000System Reset by Software.
Sounds like an IOS bug. Upload a different IOS version and see if it's any better.
This is a Sup720 & it has a CF slot in front. Is there a CF card available?
04-23-2018 10:24 PM - edited 04-23-2018 11:58 PM
can i upload this one ? s72033-psv-mz.122-18.SXD4.bin and also please tell me which is fastest way to upload ios on flash i already spend 6 hour to upload ios please tell me fastest way to upload ios in flash before i m using xmodem method have any other idea
Yes cf card are available are but they dont dectect in romon mode i copy ios with in cf diskflash but they don't detect in romon mode also i check (rommon 3 > dir disk0:
device does not contain a valid magic number
dir: cannot open device "disk0:")
04-24-2018 12:14 AM
@salman Baig wrote:
device does not contain a valid magic number
Is the CF inside a Cisco-branded variety?
04-24-2018 12:37 AM
04-24-2018 12:39 AM - edited 04-24-2018 12:40 AM
Try this:
flash_init load_helper dir disk0:
If it still doesn't work, can you re-format the CF with FAT16 and try again?
04-24-2018 05:23 AM
still same in rommon mode i format cf and in to fat 16 but not detect
04-24-2018 04:42 PM
04-25-2018 01:18 AM - edited 04-25-2018 01:20 AM
i have 5 cf its meas all of that are dead ?
04-25-2018 02:31 AM
04-25-2018 02:59 AM - edited 04-25-2018 03:00 AM
@Leo Laohoo can you please write down here complete command to xmodem to transfer .and tell me which ios is the best have not no bug can you please tell me the ios name rightnow i trying to upload s72033-psv-mz.122-18.SXD4.bin
04-25-2018 03:07 AM - edited 04-25-2018 03:07 AM
@Salman.Baig wrote:
@Leo Laohoo can you please write down here complete command to xmodem to transfer .and tell me which ios is the best have not no bug can you please tell me the ios name rightnow i trying to upload s72033-psv-mz.122-18.SXD4.bin
Go down to Recovery Procedure section and look at Step 7.
Otherwise, contact Cisco TAC for assistance or RMA.
04-25-2018 04:08 AM
Hi,
In addition to my previous post please note that if your CompactFlash memory card is of 512MB capacity this must be installed in the DISK 1 slot.
Best regards,
Antonin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide