Cisco Network Assistant unable to create VLANs

[Juan Luis Hoyo]

Hi,

I´m using CNA version 6.2 to manage a network that includes 2960X-24PS, 2960X-48LPS, 2960CX-8PS and 2960XR switches models.

When I create VLANs using 'Configure -> Switching -> VLANs -> Configure VLANs' tab, it fails on 290-48LPS and 2960CX-8 models. No error messange and no crash, it just doesn´t create the VLANs.

As workaround, I have to create the VLANs using CLI. Then, I can manage VLAN things using CNA normally. 

I don´t find this issue in the release notes or in the bug tracker. Is it recognise as a know issue? Is there any patch to fix it?

Thanks in advanced!

[Juan Luis Hoyo]

Hi everyone,

I found some other issues while configuring the switches frome CNA:

 - cannot create VLANs in 2960X-48LPS switches from CNA
 - cannot create VLANs in 2960CX-8 switches from CNA
 - cannot create VLANs in 3560CX-12 switches from CNA
 - in switches 2960XR smartport roles on SFP ports are mapped wrong. When you configure SFP ports from CNA, configuration is done over Gi0/1-4 instead Gi1/1-4.

Are these issues knows in CNA 6? How they could be solved?

Any comment would be appreciated!

[vladyslav_s]

year 2020 and cna 6.3(4) still can't manage Vlans/VTP. At least on 2960X switches..

is this going to be resolved?

[Georg Pauwen]

Hello,

looking at the release notes for CNA, it appears to be a problem with the IOS version running on the 2960X: Which version are your switches running?

CSCut28654 (Applies to Cisco Catalyst 2960-X and Cisco Catalyst 3560-CX switches)

Configuring VLAN using Network Assistant is resolved in Cisco IOS XE Release 3.6.6E, Cisco IOS XE Release 16.5.1 and Cisco IOS releases 15.2(5)E1, 15.2(6)E or later.

[vladyslav_s]

right... mine are 15.2(2)E4

Thank you.