Hi,
I am configuring a cisco 1921 router.
I have configured GE0/0 and GE0/1 interfaces, as well as DNS and default gateway.
However i cannot connect to the internet.
yourname#show running-config
Building configuration...
Current configuration : 5613 bytes
!
! Last configuration change at 17:49:26 UTC Wed Dec 10 2014 by hardrock
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
!
logging buffered 51200 warnings
!
no aaa new-model
!
ip cef
!
!
!
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
!
!
!
ip name-server 200.3.250.1
ip name-server 190.104.163.57
no ipv6 cef
!
multilink bundle-name authenticated
!
!
crypto pki trustpoint TP-self-signed-1725015630
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1725015630
revocation-check none
rsakeypair TP-self-signed-1725015630
!
!
crypto pki certificate chain TP-self-signed-1725015630
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31373235 30313536 3330301E 170D3134 30383233 31383434
30315A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 37323530
31353633 3030819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A7DD C3B3451C 24B9F02F 19C53746 FE1D4A78 4561C162 B3A2CD8D F1EF6B53
D5027463 79176EC9 34FD0E67 DD49AD71 DAF6804E 1C1585D6 CAC7E21D 128F9CC7
39C44D18 9E8DD6D3 F62EF7EF 9FEC1578 BBEE86F3 7091BBE1 4914AD19 3A5A97C1
A2138B7B D57CE757 13770128 F5F7F0BA F9AC7BB5 EE7A1313 9FE26D0D AF039803
0DEB0203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 14B2814A B906D357 135C375A 2217BA05 ADB64692 3C301D06
03551D0E 04160414 B2814AB9 06D35713 5C375A22 17BA05AD B646923C 300D0609
2A864886 F70D0101 05050003 81810015 5C386217 00E587EE 48FF2BE0 503FA9D4
83BEC9D5 BAE40D06 FBF60288 D3D471B4 3DC5CE3A 77E7F508 B2BAEFB0 F905AE67
A20F263C 06A09D95 21D08629 90DACD39 C4D0F526 ABD68562 7E0C03B8 3A21DF8E
AF98096F DE7FF790 C443EEA3 135083BB 929FA5CC 37ACFAAB B133F862 474B6C2F
E9204DD4 7774B026 6181269F F10C0E
quit
license udi pid CISCO1921/K9 sn FGL1834240J
!
!
username hardrock privilege 15 secret 5 $1$Yo.4$dxDDN301CejSRxU1etlFb/
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
description $ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$$ETH-WAN$
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
!
interface GigabitEthernet0/1
description $ETH-WAN$
ip address xxx.xxx.xxx.166 255.255.255.252
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
!
interface GigabitEthernet0/0/0
no ip address
!
interface GigabitEthernet0/0/1
no ip address
!
interface GigabitEthernet0/0/2
no ip address
!
interface GigabitEthernet0/0/3
no ip address
!
interface Vlan1
no ip address
!
ip forward-protocol nd
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 xxx.xxx.xxx.165
!
access-list 1 permit any
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 101 permit tcp any any established
!
!
!
control-plane
!
!
banner exec ^C
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you want to
use.
-----------------------------------------------------------------------
^C
banner login ^C
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE PUBLICLY-KNOWN
CREDENTIALS
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE
TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
-----------------------------------------------------------------------
^C
!
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler allocate 20000 1000
!
end
any ideas?
