ā03-13-2013 06:27 AM - edited ā03-07-2019 12:13 PM
I have a cisco router 1941 and i have uploaded before evaluation license , now i have already bought cisco security license .I have already installed on cisco router , but the problem the router is still using the evaluation license not the new license . Please advise to fix this problem.
RSP#sh flash:
-#- --length-- -----date/time------ path
1 55088360 Oct 10 2012 06:04:10 +00:00 c1900-universalk9-mz.SPA.151-4.M4.bin
2 2903 Feb 4 2013 12:23:32 +00:00 cpconfig-19xx.cfg
3 1697952 Feb 4 2013 12:23:22 +00:00 securedesktop-ios-3.1.1.45-k9.pkg
4 415956 Feb 4 2013 12:23:26 +00:00 sslclient-win-1.1.4.176.pkg
5 1038 Feb 4 2013 12:23:30 +00:00 home.shtml
6 115712 Feb 4 2013 12:23:32 +00:00 home.tar
7 2999808 Feb 4 2013 12:23:36 +00:00 cpexpress.tar
8 1564 Jan 16 2013 05:49:04 +00:00 running-config
9 2225 Mar 12 2013 13:11:46 +00:00 FCZ164191GD_20130311062353151.lic
196141056 bytes available (60346368 bytes used)
RSP#sh version
Technology Package License Information for Module:'c1900'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 EvalRightToUse securityk9
data None None None
RSP#sh license
Index 1 Feature: ipbasek9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 2 Feature: securityk9
Period left: 8 weeks 2 days
Period Used: 1 day 0 hour
License Type: EvalRightToUse
License State: Active, In Use
License Count: Non-Counted
License Priority: Low
Index 3 Feature: datak9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 4 Feature: SSL_VPN
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: 0/0 (In-use/Violation)
License Priority: None
Index 5 Feature: ios-ips-update
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 6 Feature: WAAS_Express
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
ā03-13-2013 06:55 AM
You should just need to put in the "license accept end user agreement" command in global config mode and accept the agreement.
Best regards,
Greg
ā03-13-2013 10:27 AM
I hove already do that , but there is no result.
ā03-13-2013 07:01 AM
Hi,
You should revoke the old license first.
license revoke ....
Here is the config guide with commands
http://www.cisco.com/en/US/docs/ios/csa/configuration/guide/csa_commands.html#wp1389423
HTH
ā03-13-2013 10:34 AM
Dear
I will check snd i will give the feedback
thank you
ā03-13-2013 11:05 AM
when i use the revoke command , i did not find the running license which is as above securityk9.Please advise
RSP#license revoke flash:FCZ164191GD_20130311062353151.lic flash:?
flash:FCZ164191GD_20130311062353151.lic
flash:c1900-universalk9-mz.SPA.151-4.M4.bin
flash:cpconfig-19xx.cfg
flash:cpexpress.tar
flash:home.shtml
flash:home.tar
flash:running-config
flash:securedesktop-ios-3.1.1.45-k9.pkg
flash:sslclient-win-1.1.4.176.pkg
How can i force the router to use my new license. When i also try to clea the running license , router told me
% Error: No license entries with the feature name: securityk9
Thank you
ā03-13-2013 11:27 AM
Try it without the flash: at the end:
RSP#license revoke flash:FCZ164191GD_20130311062353151.lic
HTH
ā03-15-2013 09:14 AM
dear
thank you for yur support , but i get incomplete command error. Any suggestions ,please.
thank you
ā03-15-2013 10:11 PM
Dear
Any updates please , i need to solve this problem ASAP. The license of securityK9 is built in .How can i change built in license to the license .
ā03-15-2013 10:19 PM
not sure if this is in a production environment - but you could always try to delete the old oen from flash and reload.
thats just a shot in the dark though since i am mostly a switch guy
ā03-16-2013 06:00 AM
Dear Experts
Any help please . Any updates
Thank you
Islam Kamal
ā03-17-2013 06:41 AM
Any answers pleasee
ā03-18-2013 08:22 AM
Any updates
ā03-19-2013 02:33 AM
any results
ā03-19-2013 04:30 AM
Please post the errors you see whenever you run the command:
license install flash:FCZ164191GD_20130311062353151.lic
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide