08-04-2024 03:09 AM - edited 08-04-2024 07:11 AM
I have installed a new IOS image but it's not loading in normal mode..!! there was the same issue on the previous iOS.
What could the problem? Anyone can help..?
switch: boot flash:c3560-ipbasek9-mz.122-55.SE12.bin
Loading "flash:c3560-ipbasek9-mz.122-55.SE12.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:c3560-ipbasek9-mz.122-55.SE12.bin" uncompressed and installed, entry point: 0x1000000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(55)SE12, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Thu 28-Sep-17 02:04 by prod_rel_team
Image text-base: 0x01000000, data-base: 0x02D00000
Initializing flashfs...
flashfs[1]: 1 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 11776512
flashfs[1]: Bytes available: 4222464
flashfs[1]: flashfs fsck took 1 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Checking for Bootloader upgrade.. not needed
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
POST: Inline Power Controller Tests : Begin
POST: Inline Power Controller Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
Waiting for Port download...Complete
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C3560-24PS (PowerPC405) processor (revision S0) with 131072K bytes of memory.
Processor board ID FDO1310X1WZ
Last reset from power-on
1 Virtual Ethernet interface
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:24:F7:E7:32:80
Motherboard assembly number : 73-9673-11
Power supply part number : 341-0029-05
Motherboard serial number : FDO13100H1W
Power supply serial number : DTN130440K5
Model revision number : S0
Motherboard revision number : A0
Model number : WS-C3560-24PS-S
System serial number : FDO1310X1WZ
Top Assembly Part Number : 800-25861-05
Top Assembly Revision Number : D0
Version ID : V07
CLEI Code Number : COMUY10ARA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C3560-24PS 12.2(55)SE12 C3560-IPBASEK9-M
08-04-2024 03:47 AM - edited 08-04-2024 03:47 AM
- Try to boot a similar image from USB , If the device don't have a usb you have to use TFTP server (using the tftpdnld ROMmon command recovery) in order to load a (new) image for the device.
M.
08-04-2024 07:07 AM - edited 08-04-2024 07:12 AM
I format flash and then loaded a new image through teraterm(tftp), but its not booting completely.
Keep hanging after the following message while booting iOS...
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C3560-24PS 12.2(55)SE12 C3560-IPBASEK9-M
08-04-2024 07:44 AM
- A hardware problem could be involved : power down the switch and power up again with the console ready. Look at the power up sequence and check for errors. If still not resolved then try a factory reset
M
08-04-2024 06:15 AM
You did not show what ´s wrong. The logs show an image being uncompressed and installed. What the prompt you get after that?
08-04-2024 07:09 AM - edited 08-04-2024 07:10 AM
Keep hanging after the following message while booting iOS... I tried to restart the switch multiple times but it's freezing at the same point.
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C3560-24PS 12.2(55)SE12 C3560-IPBASEK9-M
08-10-2024 11:09 PM
Use a different computer.
The switch's console port is having an issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide