cisco switch 3850

[selim]

when i rty to configure ospf  on cisco switch 3850  "protocol not in this image"

What would be ths solution  

[Seb Rupik]

Hi there,

You need a minimum of an IP Base license for OSPF.

What is the output of sh license ?

cheers,

Seb.

[Joseph W. Doherty]

Insure the 3850 is loaded/licensed to support OSPF.

[GRANT3779]

This will be related to the feature set you are running on the switch -

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/qa_c67-722110.html

Table 2.

If you run the following command on your switch to see what you currently have -

#show license right-to-use
Slot# License name Type Count Period left
----------------------------------------------------------
1 ipservices permanent N/A Lifetime
1 ipbase permanent N/A Lifetime

License Level on Reboot: ipservices

Slot# License name Type Count Period left
----------------------------------------------------------
2 ipservices permanent N/A Lifetime

License Level on Reboot: ipservices

[Mark Malone]

This will allow you ospf for 90 days under eval license until you buy it

license right-to-use activate ipservices evaluation