12-15-2019 04:12 PM
Hi All,
I am not sure if this is the correct forum to post this issue but i would take the liberty as some of you might have that same problem.
I need to console access into a Cisco devices and the laptop HP elite does not have a serial port on it and hence i obtained a USB to Ethernet adapter ( comsol ) and trying to connect to the serial port on the Cisco box but there is no response. When i checked on the device manager i see that the port com3 shows the error code 34 and on another laptop shows code 12 (tried all the suggested steps updating device drivers, uninstall / reinstall, regkey edit etc etc) but none seem to make it work. Is the adaptor not compatible or do i need to get a USB to SERIAL adaptor ?
Solved! Go to Solution.
12-15-2019 04:38 PM
Hi,
To console into the router, you need a USB to Serial adaptor.
Thanks
john
12-15-2019 04:38 PM
Hi,
To console into the router, you need a USB to Serial adaptor.
Thanks
john
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: