10-22-2012 01:26 AM - edited 03-07-2019 09:36 AM
Hi,
I want to reach router console connection over PSTN line...What is the way to get Router Console over PSTN phone line ??
What all devices are required to achive connection ??
Regards,
Pratik Chheda
10-22-2012 07:33 AM
Have you seen the following document?
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml
You will need an old fashioned modem which is connected to the aux port rather than the console.
Regards.
10-22-2012 07:39 AM
We always use the console port because you can actually watch the device bootup if you have to. You don't see anything on the AUX port until it is completely booted up .
10-23-2012 12:39 AM
Thanks a lot for the support...i have gone through the document....i additionally want to know which modem is required to procure ...what will be the company and model number for the same.
Thanks....
10-23-2012 01:21 AM
Hi Pratik,
Your above query can be better answered by the Modem vendor,
For example you can contact MROTEK modems vendor.
He may better guide you.
We also have the convertors like RS232 to ethernet etc...,
Regards
Thanveer
"Everybody is genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is a stupid."
10-23-2012 02:33 AM
Hey Muhammad,
Thanks a lot suggession, Will Contact them...
10-23-2012 02:46 AM
Hi Pratik,
You are welcome.
Remember to rate all the posts, that for us is more important, that a thanks.
Regards
Thanveer
"Everybody is genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is a stupid."
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide