09-10-2007 11:07 AM - edited 03-05-2019 06:23 PM
I am preparing to convert a 6509 from CatOS to IOS. I was wondering if anyone knows if there is a way to convert back from IOS to CatOS?
Thanks,
Jack
Solved! Go to Solution.
09-10-2007 11:34 AM
Hi Jack,
Here you are both:
System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml
System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml
HTH,
Mohammed Mahmoud.
09-10-2007 11:34 AM
Hi Jack,
Here you are both:
System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml
System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml
HTH,
Mohammed Mahmoud.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide