CoreSwitch 6509 HSRP Activation

[JUNKSA_2]

Guys,

We have 2 CoreSwitches 6509 one is already configured and activated. Our goal now is to run and activate the second CoreSwitch and implement the HSRP/Redundancy. So in case the active CoreSwitch (Primary) is down the secondary will be up.

Any configuration and advice is highly appreciated.

Thanks

[cowetacoit]

This should help...

http://www.cisco.com/en/US/docs/internetworking/case/studies/cs009.html

Also GLBP could be an option. You can have fail over and load balancing.

http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fs_glbp2.html