I am replacing a pair of Nexus 5K using HSRP with VSS 9500x40. The SVI have dhcp relay on all the interface the same commands doesn't work on the 9500. What would be the commands to replace this. I am not sure if relay is even needed since dhcp server is on the same LAN
Here is the config on 5k
interface Vlan10
no shutdown
no ip redirects
ip address 10.100.10.1 255.255.255.0
ip dhcp relay address 10.100.3.20
ip dhcp relay address 10.100.3.154
!
