Enable SSH don't appear in my SG-200-26 Switch

[Alzor]

Hi all,

I am trying to communicate with my cisco SG200-26, I have enable the ssh ( Security -> SSH Client -> SSH Server Authentication) and followed all the indication posted in the forum. But I cant connect with cisco neither by telnet or ssh.

As can you see I have no the option to enable SSH in the TCP/UDP Services.

Just tell me "Network error: Connection refused" each time I try to make a connection.

I am using the default IP and I have tried the port 22 23 24 etc. I cant see the connection in the port  in the TCP/UDP Services

Can any one help me? any one have the same problem?

Thank you all.

[Seb Rupik · Accepted solution]

HI there,

The SG200 does not support SSH for management.

Check and compare the 'management' sections from the SG200 ad SG300 datasheets (Table1):

https://www.cisco.com/c/en/us/products/collateral/switches/small-business-200-series-smart-switches/data_sheet_c78-634369.html

https://www.cisco.com/c/en/us/products/collateral/switches/small-business-smart-switches/data_sheet_c78-610061.html

cheers,

Seb.

[ManoaChris]

Sorry, posted in error.