09-06-2021 09:48 AM - edited 09-06-2021 09:50 AM
hi all,
everytime i run this command to enable snmpv3 i get an invalid command
snmp-server user user01 network-admin v3 auth sha password priv aes-128 password
^
% Invalid command at '^' marker.
thanks,
rob
09-06-2021 11:55 AM - edited 09-06-2021 12:11 PM
Hope you are doing, in config mode right ?
snmp-server user name [auth {md5 | sha} passphrase [auto] [priv [aes-128] passphrase] [engineID id]
switch(config)# snmp-server user NMS auth sha abcd1234 priv abcdefgh engineID 00:00:00:63:00:01:00:10:20:15:10:03
09-06-2021 12:02 PM
Hello!
Can you share what NX-OS software release this Nexus 7000 switch is running?
The syntax of the command you shared appears to be fine. Support for SNMPv3 was added in NX-OS software release 6.2(2), so you need to be running that version or higher in order to configure an SNMPv3 user.
Thank you!
-Christopher
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide