01-20-2012 02:37 AM - edited 03-07-2019 04:27 AM
Hi SupportCommunity
I hope that you can help with this. I am having Cisco 3845 series router with c3900-universalk9-mz.SPA.151-4.M2.bin IOS . I want to install new Licence on it for DATA. When i am trying to install licence on it i am facing the error "% Error: License installation failed with error: XML parsing failed".
07-04-2012 03:23 AM
Hi,
We also experincing the same error on a pre-installed CUE router.
CME:
"flash0:c3900-universalk9-mz.SPA.152-1.T.bin"
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.2(1)T, RELEASE SOFTWARE (fc1)
Cisco CISCO3945-CHASSIS (revision 1.0) with C3900-SPE150/K9 with 980992K/67584K bytes of memory.
CUE:
"flash0:c3900-universalk9-mz.SPA.152-1.T.bin"
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.2(1)T, RELEASE SOFTWARE (fc1)
Cisco CISCO3945-CHASSIS (revision 1.0) with C3900-SPE150/K9 with 980992K/67584K bytes of memory.
Any advise?
07-04-2012 04:27 AM
Hi SupportCommunity
I hope that you can help with this. I am having Cisco 3845 series router with c3900-universalk9-mz.SPA.151-4.M2.bin IOS . I want to install new Licence on it for DATA. When i am trying to install licence on it i am facing the error "% Error: License installation failed with error: XML parsing failed
Hello ,
Check out the below link hope it helps !!
https://supportforums.cisco.com/docs/DOC-15143
Regards
Ganeshh Iyer
08-25-2015 03:59 PM
ON MY CASE WAS THE UDI as Mohit Grover said.
I call to cisco TAC and open a case, they request to me the PAK, the UDI, the serial number CUE and my login cisco acount. then they generate again the license with my correcte UDI and send to my email.
07-04-2012 07:57 AM
Hi,
This typically happens when the license file is generated with wrong UID. Get a new license files generated for your devices.
Kind Regards,
Ivan
**Please grade this post if you find it useful.
12-26-2013 06:25 PM
Correct::::
Make sure while generating license file, you enter correct Product ID & Serial Number.
CUE# show license udi
Device# PID SN UDI
--------------------------------------------------------------------------------
*0 NME-CUE FOC19019XXX NME-CUE:FOC19019XXX
-----------------------------------------------
09-26-2017 07:34 AM
Buenos dias,
Favor su ayuda, estoy tratando de instalar una licencia data en un router cisco 881 y me muestra el siguiente error: % Error: License installation failed with error: XML parsing failed
banred-avmiguelalcivargye#sh license udi
Device# PID SN UDI
-----------------------------------------------------------------------------
*0 CISCO881-K9 FTX164085MG CISCO881-K9:FTX164085MG
Favor su ayuda
07-10-2012 09:11 AM
Hi!
Any luck with new license files?
Kind Regards,
Ivan
11-11-2013 01:06 PM
Hello,
I had the same issue and was solved unziping the file I recieved after registering the license at cisco.com.
After this, just copy the unziped .lic file to the router (copy tftp flash) and install the license (license install
Hope it could be of help;
Best Regards
10-09-2018 10:22 AM
please i have this same issues XML parsing failed pls cam some one show me how to unzip license file to enable install license in my cisco router 1941 pls
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide