08-31-2023 05:19 AM
Hi all ,
This error is appeared on switch 2960 i need to know what this error ?
%ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/5: Power given, but Power Controller does not report Power Good
08-31-2023 05:33 AM
is this only port having issue ?
what version of code running also post show version and show power inline
also check below thread :
https://community.cisco.com/t5/switching/controller-port-error/td-p/2876390
08-31-2023 06:02 AM
Admin-4#show cable-diagnostics tdr int gigabitEthernet 1/0/1
TDR test last run on: August 31 15:57:14
Interface Speed Local pair Pair length Remote pair Pair status
--------- ----- ---------- ------------------ ----------- --------------------
Gi1/0/1 auto Pair A 33 +/- 1 meters N/A Short
Pair B 33 +/- 1 meters N/A Short
Pair C 34 +/- 1 meters N/A Short/Crosstalk
Pair D 34 +/- 1 meters N/A Short/Crosstalk
08-31-2023 08:03 AM
Faulty cable at the far end.
08-31-2023 06:18 AM - last edited on 08-31-2023 08:07 AM by rupeshah
Dear ,
Kindly be informed that this issue is related to some ports not all ports and the phone is directly connected to the switch
Admin-4 uptime is 15 weeks, 5 days, 18 hours, 24 minutes
System returned to ROM by power-on
System restarted at 21:38:29 EEST Fri May 12 2023
System image file is "flash:c2960s-universalk9-mz.150-1.SE.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco WS-C2960S-24PD-L (PowerPC) processor (revision B0) with 131072K bytes of memory.
Processor board ID FOC1438Y0YA
Last reset from power-on
2 Virtual Ethernet interfaces
1 FastEthernet interface
26 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-xxx
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 6C:50:4D:6C:07:80
Motherboard assembly number : 73-12427-07
Power supply part number : 341-0393-02
Motherboard serial number : FOC14374WAX
Power supply serial number : DCA1424U1WS
Model revision number : B0
Motherboard revision number : A0
Model number : WS-C2960S-24PD-L
Daughterboard assembly number : 73-11933-04
Daughterboard serial number : FOC1438150R
System serial number : FOC1438Y0YA
Top Assembly Part Number : 800-32456-02
Top Assembly Revision Number : A0
Version ID : V02
CLEI Code Number : COMFF10BRB
Daughterboard revision number : A0
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 28 WS-C2960S-24PD-L 15.0(1)SE C2960S-UNIVERSALK9-M
Configuration register is 0xF
Admin-4#show
Admin-4#show powe
Admin-4#show power in
Admin-4#show power inline
Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
1 370.0 90.5 279.5
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/1 auto faulty 0.0 n/a n/a 30.0
Gi1/0/2 auto on 6.3 IP Phone 7942 2 30.0
Gi1/0/3 auto on 6.3 IP Phone 7942 2 30.0
Gi1/0/4 auto on 6.3 IP Phone 7942 2 30.0
Gi1/0/5 auto off 0.0 n/a n/a 30.0
Gi1/0/6 auto on 6.3 IP Phone 7942 2 30.0
Gi1/0/7 auto on 5.0 IP Phone 7911 2 30.0
Gi1/0/8 auto off 0.0 n/a n/a 30.0
Gi1/0/9 auto off 0.0 n/a n/a 30.0
Gi1/0/10 auto on 3.3 IP Phone 7821 1 30.0
Gi1/0/11 auto on 12.0 IP Phone 7965 3 30.0
Gi1/0/12 auto on 5.0 IP Phone 7911 2 30.0
Gi1/0/13 auto on 5.0 IP Phone 7911 2 30.0
Gi1/0/14 auto off 0.0 n/a n/a 30.0
Gi1/0/15 auto on 5.0 IP Phone 7911 2 30.0
Gi1/0/16 auto off 0.0 n/a n/a 30.0
Gi1/0/17 auto off 0.0 n/a n/a 30.0
Gi1/0/18 auto off 0.0 n/a n/a 30.0
Gi1/0/19 auto off 0.0 n/a n/a 30.0
Gi1/0/20 static faulty 0.0 n/a n/a 30.0
Gi1/0/21 auto off 0.0 n/a n/a 30.0
Gi1/0/22 auto off 0.0 n/a n/a 30.0
Gi1/0/23 auto off 0.0 n/a n/a 30.0
Gi1/0/24 auto off 0.0 n/a n/a 30.0
Admin-4#
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide