12-29-2022 12:39 AM
Greetings Cisco fellows,
I've set up an ERSPAN source session on Nexus9000v (NXOS 7.0.3.I7.2), this is the outcome
of sh mon sess all:
##################################
switch(config-erspan-src)# do sh mon sess all
session 1
---------------
type : erspan-source
state : error (no such pss key) <====== WHAT'S THIS?
erspan-id : 1
vrf-name : default
acl-name : acl-name not specified
ip-ttl : 255
ip-dscp : 0
destination-ip : 20.0.0.2
origin-ip : 20.0.0.1 (global)
source intf :
rx : Eth1/2
tx :
both :
source VLANs :
rx :
tx :
both :
filter VLANs : 1
source fwd drops :
marker-packet : disabled
###################################
Anybody able to explain what does the state "error (no such pss key)" mean?
Many thanks.
12-29-2022 08:19 AM
- FYI : https://gns3.com/community/featured/erspan-source-session-error-no-such-pss-key , it seems that RSPAN and ERSPAN are not supported on the nexus 9000v platform ,
M.
12-29-2022 12:54 PM
check the limitation :
12-30-2022 01:13 AM
Thank you BB
can you recommend any switching virtual image supporting ERSPAN which I can use in GNS3?
Thanks
12-30-2022 07:33 AM
Not that i am aware any image does that support. let me look any new image can support (not gauranteed)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide