Filter log

[isabelaarcas17]

Hi!

I want fo filter only one information when I run the command : sh log

The log is :

%PLATFORM_THERMAL-4-SECONDARY_OVERTEMP: Switch 1: Temperature is above normal (yellow) limit.


Its possible to filter only the logs with the same information?

Thanks! 

[marce1000]

 - You could use a logging discriminator , an example being provided in  https://www.uni-koeln.de/~pbogusze/posts/Using_IOS_logging_discriminator.html

 M.

[David Ruess]

Hello,

You could try just adding part of the link on the show log command with an include statement

sh log | include Temperature is above normal (yellow) limit

-David