05-03-2024 10:33 AM
Hi!
I want fo filter only one information when I run the command : sh log
The log is :
%PLATFORM_THERMAL-4-SECONDARY_OVERTEMP: Switch 1: Temperature is above normal (yellow) limit.
Its possible to filter only the logs with the same information?
Thanks!
05-03-2024 10:08 PM
- You could use a logging discriminator , an example being provided in https://www.uni-koeln.de/~pbogusze/posts/Using_IOS_logging_discriminator.html
M.
05-03-2024 10:20 PM
Hello,
You could try just adding part of the link on the show log command with an include statement
sh log | include Temperature is above normal (yellow) limit
-David
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide