Guide me for Subnet

[jitendra.pipalia]

I am using 192.168.1.0/24 network for my one of the site

now i my all 254 host has been used.

i am out of ip address

can i use

192.168.0.0/23 subnet

so that my first host ip will be 192.168.0.1/23

pls advise me

may this is silly question but i hev some doubt

[Thotsaphon Lueangwattanaphong]

Jitendra,

There is no silly question here. (grin)

Yes, you can use 192.168.0.0/23.

Technically speaking, you may be concerned about a broadcast domain as well.

HTH,

Toshi

[greg.washburn]

If you do this just remember you will need to change any each individual computer to get the correct subnet mask. If using dhcp server this task may be a little less time consuming as you can change it there and then reboot or release / renew each pc rather than statically change them.