cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1195
Views
0
Helpful
3
Replies
Highlighted
Beginner

Help me configure switches 9300 for integrate in my network.

We have a network based on DLink 3120 switches. How can I integrate Catalyst 9300 switches into our network as a distributed layer?

Everyone's tags (1)
3 REPLIES 3
VIP Advisor

Re: Help me configure switches 9300 for integrate in my network.

In Short answer it is possiblem, But we need to know exiting your network topology so we can suggest is best method.

So Dlink Switches going to be Access switches ?

 

On high level it looks like below :

 

Internet ----(internet router)---(new 9300) ----Dlink Switch ---users.

 

 

BB
*** Rate All Helpful Responses ***
VIP Advocate

Re: Help me configure switches 9300 for integrate in my network.

Hi,

Configure a Trunk port between Distribution 9300 switch and DLink 3120 and allowed all required VLAN on the Trunk ports. 

 

Distribution Layer 9300 ======>=====>Dlink3120----->Users

 

Regards,

Deepak Kumar

 

Regards,
Deepak Kumar,
Don't forget to vote and accept the solution If this comment will make help you!
VIP Advisor

Re: Help me configure switches 9300 for integrate in my network.

Hello


@roma.didyk wrote:

We have a network based on DLink 3120 switches. How can I integrate Catalyst 9300 switches into our network as a distributed layer?


I agree with @balaji.bandi  when you mention integrate it suggests you need to either replace an existing distribution layer switch or you wish to add this as a distribution point - can you elaborate on what you mean by integrate and also if possible post topology diagram as a reference.

 

 



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards