05-05-2023 10:53 AM
Hello.
RE: correct OS installation for C9300...
How do I know which C9300-48U device I have from the selections below? (I don't see this data in the "sh ver".)
Solved! Go to Solution.
05-05-2023 11:16 AM
Hello,
This specifics there will not be on the show version. You need to rely on some invoice or other doc.
The difference is indeed very small. For example
C9300-48U-E |
Catalyst 9300 48-port 1G copper with modular uplinks, UPOE, Network Essentials |
C9300-48U-E-UL |
Catalyst 9300 48-port 1G copper with modular uplinks, UPOE, Network Advantage (Compatible with UL1069 Standard*) |
05-05-2023 11:16 AM
Hello,
This specifics there will not be on the show version. You need to rely on some invoice or other doc.
The difference is indeed very small. For example
C9300-48U-E |
Catalyst 9300 48-port 1G copper with modular uplinks, UPOE, Network Essentials |
C9300-48U-E-UL |
Catalyst 9300 48-port 1G copper with modular uplinks, UPOE, Network Advantage (Compatible with UL1069 Standard*) |
05-05-2023 11:17 AM - edited 05-05-2023 11:27 AM
Show inventory <<- this will give you products ID
From this you can check data sheet and know which model you have.
05-05-2023 11:26 AM
Good idea, but this did not produce the info. I found it by not completing, but initiating a TAC case, then inserting the serial number into the requested field.
05-05-2023 11:31 AM
Show me the output of
Show inventory
I will try guide you to get right model
05-05-2023 12:03 PM
That's fine. I found it as discussed in the thread above, by using the TAC portal.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide