How do I know which C9300-48U device I have from the selections below?

[jmaxwellUSAF]

Hello.

RE: correct OS installation for C9300...

How do I know which C9300-48U device I have from the selections below? (I don't see this data in the "sh ver".)

Catalyst 9300-48U-A Switch

Catalyst 9300-48U-A-UL Switch

Catalyst 9300-48U-E Switch

Catalyst 9300-48U-E-UL Switch

Thank you.

[Flavio Miranda · Accepted solution]

Hello,

  This specifics there will not be on the show version. You need to rely on some invoice or other doc.

The difference is indeed very small. For example

C9300-48U-E

Catalyst 9300 48-port 1G copper with modular uplinks, UPOE, Network Essentials

C9300-48U-E-UL

Catalyst 9300 48-port 1G copper with modular uplinks, UPOE, Network Advantage (Compatible with UL1069 Standard*)

[MHM Cisco World]

Show inventory <<- this will give you products ID 

From this you can check data sheet and know which model you have.

[jmaxwellUSAF]

Good idea, but this did not produce the info. I found it by not completing, but initiating a TAC case, then inserting the serial number into the requested field.

[MHM Cisco World]

Show me the output of 

Show inventory 

I will try guide you to get right model 

[jmaxwellUSAF]

That's fine. I found it as discussed in the thread above, by using the TAC portal.