02-06-2024 08:00 PM
Hi Team,
Please provide command to configure Tacas and snmp in Cisco N540x routers.
Thanks,
Prashanth
02-06-2024 10:06 PM
Hello @poojaryp1974
Follow this complete guide:
02-08-2024 02:13 AM
Hi,
please provide me Tacacs command and snmp v1 command.
Thanks
prashanth
02-08-2024 02:34 AM
this for tacacs in ASR router
MHM
02-10-2024 02:21 AM
02-10-2024 02:27 AM
Hello,
the below should work:
! Configure TACACS+ server
tacacs-server host <TACACS_SERVER_IP> key <TACACS_SHARED_SECRET>
! Enable TACACS+ authentication for login
aaa authentication login default group tacacs+ local
! Enable TACACS+ authorization for privileged mode access
aaa authorization exec default group tacacs+ local
! Enable TACACS+ accounting
aaa accounting exec default start-stop group tacacs+
! Configure SNMP community string for read-only access
snmp-server community <COMMUNITY_STRING> RO
! Configure SNMP community string for read-write access (optional)
snmp-server community <COMMUNITY_STRING> RW
! Configure SNMP trap receiver
snmp-server host <TRAP_RECEIVER_IP> <SNMP_VERSION> <COMMUNITY_STRING>
! Enable SNMP logging
snmp-server enable traps
! Set the SNMP system contact information
snmp-server contact <CONTACT_INFORMATION>
! Set the SNMP system location information
snmp-server location <LOCATION_INFORMATION>
02-10-2024 02:46 AM
N540X and ASR9k use same IOS XR
So the link I share work for N540x
MHM
02-10-2024 02:27 AM
have you looked at the configuration guide - what is the challenges you have ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide