How to copy the configuration of a Cisco N3K-c3048tp-1ge VER01 to another Cisco N3K switch.

[EduardoRuiz]

Hi, I have a Cisco N3K C3048 switch that is currently running in place and would like to export its configuration and imported into another (same model) C3048 to have it as a backup. Is there a special way to do this? I normally use TFTPd64 and putty to export and import configuration files on other Cisco switches,  but for some reason on this model I'm having a hard time. 

I normally use these commands

copy running-config tftp:

enter the IP address of the computer currently connected to the switch via the console

Done, the configuration transfers to the pc.

When trying to do this on this switch I'm getting this message.- see attached image.

Also when I try to see the IP address of the switch I'm getting the message Ip interface Status for VRF default. I have never seen this message.

Can you assist me with this?

Thanks in advance.

[balaji.bandi]

127.0.0.1 Link-Local Loopback address.

If you click the same where you see the server interface, in the pull-down you can see the IP address, so you need to use that IP address.

you can use example guide :

https://networklessons.com/cisco/ccna-routing-switching-icnd1-100-105/upgrade-cisco-ios-image