11-25-2013 10:42 PM - edited 03-07-2019 04:47 PM
How to shutdown vlan in layer2 ? Thanks in advance.
I've done it using "shutdown" command. but still it is showing active in "show vlan".
switch0(config)#interface vlan 2
switch0(config-if)#
%LINK-5-CHANGED: Interface Vlan2, changed state to up
switch0(config-if)#shutdown
%LINK-5-CHANGED: Interface Vlan2, changed state to administratively down
switch0(config-if)#end
switch0#
%SYS-5-CONFIG_I: Configured from console by console
---------------------------
switch0#show vlan brief
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
Gig1/1, Gig1/2
2 VLAN0002 active
Regards,
Chandu
Solved! Go to Solution.
11-25-2013 10:50 PM
HI Chandu,
vlan 100, shutdown, and interface vlan 100, shutdown
Shutting down the interface vlan 2 disables the Layer 3 interface for that VLAN on the switch. This means hosts will still be able to communicate WITHIN the VLAN (Layer 2) but can not be routed off of the subnet.
Shutting down the VLAN (vlan 2) disables Layer 2 switching of that VLAN on the switch. This will effectively turn off all layer 2 switching on the VLAN (preventing all communication).
Regards
Dont forget to rate helpful posts.
11-25-2013 11:25 PM
11-25-2013 11:32 PM
HI Chandu,
PT is more then enough for CCNA.
Dont worry just study the basic conecpts and do some lab practice on PT.
If you need any more labs then just PM me.
Regards
11-25-2013 10:50 PM
HI Chandu,
vlan 100, shutdown, and interface vlan 100, shutdown
Shutting down the interface vlan 2 disables the Layer 3 interface for that VLAN on the switch. This means hosts will still be able to communicate WITHIN the VLAN (Layer 2) but can not be routed off of the subnet.
Shutting down the VLAN (vlan 2) disables Layer 2 switching of that VLAN on the switch. This will effectively turn off all layer 2 switching on the VLAN (preventing all communication).
Regards
Dont forget to rate helpful posts.
11-25-2013 10:55 PM
Sandeep,
I'm not seeing the any options here.
switch0(config)#vlan 2 ?
Regards,
Chandu
11-25-2013 11:01 PM
Hi chandu,
Config t
Vlan 2
Shut
Regards
Sent from Cisco Technical Support iPhone App
11-25-2013 11:10 PM
Still.
switch0(config)#vlan 2
switch0(config-vlan)#?
VLAN configuration commands:
exit Apply changes, bump revision number, and exit mode
name Ascii name of the VLAN
no Negate a command or set its defaults
switch0(config-vlan)#
11-25-2013 11:25 PM
HI Chandu,
Are you using PT ????
PT dont have this command.
Thanks
11-25-2013 11:28 PM
Yes it's PT. Whenever i face this type situation na... then i'll doubt whether will PT help me to pass CCNA because it is not having these type of some basic commands..
And i can't get a real equipment...
Regards,
Chandu
11-25-2013 11:29 PM
Really sad...
But thanks for you help sandeep.
11-25-2013 11:32 PM
HI Chandu,
PT is more then enough for CCNA.
Dont worry just study the basic conecpts and do some lab practice on PT.
If you need any more labs then just PM me.
Regards
11-25-2013 11:46 PM
HI,
Pls suspend the vlan
br/subhojit
11-26-2013 02:41 AM
What is the command? Subhojit .
I think even that also will not be there in PT.
11-26-2013 02:45 AM
No vlan 2
state command not supported on PT.
Regards
Sent from Cisco Technical Support iPhone App
11-26-2013 02:46 AM
HI,
# Config t
vlan 111
state suspend
Br/Subhojit
11-26-2013 02:51 AM
Same dialog. Not there.
However thank you both.
11-26-2013 12:40 AM
Thanks sandeep.
Regards,
Chandu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide