HSRP config

[sarsamivel]

Folks

We are planning for redundancy setup between 2 sites.Attached the router setup bw sites.

Can let me know if HSRP can be configured between R1 and R3.If so,how ?

SAM

[rakesh.hegde]

Hi Giuseppe ,

During load balancing paths for a prefix are assigned internally to 16 hash buckets in a round robin pattern right ? The result of the hash function based on source and destination ip (value between 0-15) is used as a pointer to pick one out of 16, and thus which path to use for the flow.

See link below

http://www.cisco.com/en/US/tech/tk827/tk831/technologies_tech_note09186a0080094806.shtml

Please let me know if I am missing something .

-Rakesh

[sarsamivel]

Hi Giuseppe,

Does the load balancing mechanism is same in cisco ASA also?