06-26-2015 02:49 AM - edited 03-08-2019 12:43 AM
I have core switch 3560 and 3550 G series switch, can i run intervlan on this switch?
I want to design network like. ISP<------------ Core switch /3550./3560<-------Layer 2 switch<-------Client PC
For example IP:1.1.1.1
Please send me configuration.
if i add firewall what will be change in command and design. please
06-26-2015 03:42 AM
Hi Junaid,
Please explain me your required details by using sample drawing..
Regards
Khaleelur Rahman
06-26-2015 02:07 PM
06-26-2015 04:22 AM
You can use either of those switches to route between vlans but the main problem is neither of those switches support NAT and you usually need this because you will be using private IPs on your network.
Unless the ISP does NAT for you and they usually don't you will need either a firewall or a router between the ISP router and your switch so you can do NAT on your private IPs.
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide