Happy Friday all,
Just as the title states, I've been having trouble getting IGMP through an NX-OSv in my lab.
I've done a good bit of research into the subject but I can seem to find an answer as to why IGMP traffic isn't traversing the switch.
This is the bare bones setup I have going on right now.
Everything is in VLAN 2 and can ping.
Router on the left has ip multicast-routing enabled, eth0/1 is setup as displayed.
NX-OS has igmp snooping enabled, IGMP querier setup as displayed on VLAN 2.
From everything I've read (for NX-OS IGMP snooping) this should work, but I'm clearly missing something. Any assistance is greatly appreciated! Happy to provide more detail.
1 Accepted Solution
Accepted Solutions
