cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1573
Views
0
Helpful
2
Replies

In WS-X4606-X2-E can we use three ports for CVR-X2-SFP and three ports X2-10GB-SR

Hi i have got a customer where they have existing WS-C4506-E 6  where they have few connections .

Now they want to put two X2-10GB-SR    the other ports where using CVR-X2-SFP   .

I have a doubt that if CVR-X2-SFP  is using in first port then can i use the second port for X2-10GB-SR or that port cannot be used .

below is the show inventory of the switch

NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4506-E 6 slot switch "

PID: WS-C4506-E        , VID: V02  , SN: FOX1449HBDR

NAME: "Linecard(slot 1)", DESCR: "Supervisor 6-E 10GE (X2), 1000BaseX (SFP) with                         2 10GE X2 ports"

PID: WS-X45-SUP6-E     , VID: V08  , SN: JAE14400HOZ

NAME: "Converter 1/1", DESCR: "Converter Module"

PID: CVR-X2-SFP        , VID: V02  , SN: FDO14360FZQ

NAME: "GigabitEthernet1/3", DESCR: "1000BaseSX"

PID: Unspecified       , VID:      , SN: AGA140312B0

NAME: "GigabitEthernet1/4", DESCR: "1000BaseSX"

PID: Unspecified       , VID:      , SN: FNS1416231T

NAME: "TenGigabitEthernet1/2", DESCR: "10Gbase-SR"

PID: X2-10GB-SR        , VID: V04  , SN: FNS14360XKX

NAME: "Linecard(slot 3)", DESCR: "10GE (X2), 1000BaseX (SFP) with 6 10GE X2 port                        s"

PID: WS-X4606-X2-E     , VID: V03  , SN: JAE150303PE

NAME: "TenGigabitEthernet3/1", DESCR: "10Gbase-SR"

PID: X2-10GB-SR        , VID: V04  , SN: FNS14360KEN

NAME: "TenGigabitEthernet3/2", DESCR: "10Gbase-SR"

PID: X2-10GB-SR        , VID: V04  , SN: FNS143617X2

NAME: "TenGigabitEthernet3/3", DESCR: "10Gbase-SR"

PID: X2-10GB-SR        , VID: V04  , SN: FNS143617XA

NAME: "TenGigabitEthernet3/5", DESCR: "10Gbase-SR"

PID: X2-10GB-SR        , VID: V02  , SN: AGA12451069

NAME: "Linecard(slot 4)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 ba                        seT "

PID: WS-X4648-RJ45-E   , VID: V01  , SN: JAE151209V1

NAME: "Linecard(slot 6)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 ba                        seT "

PID: WS-X4648-RJ45-E   , VID: V02  , SN: JAE16110113

NAME: "Fan", DESCR: "FanTray"

PID: WS-X4596-E        , VID: V03  , SN: FOX1449GZUD

NAME: "Power Supply 1", DESCR: "Power Supply ( AC 1300W )"

PID: PWR-C45-1300ACV   , VID: V06  , SN: SNI1505AS47

NAME: "Power Supply 2", DESCR: "Power Supply ( AC 1300W )"

PID: PWR-C45-1300ACV   , VID: V06  , SN: SNI1505AR37

aehqcs01#sh module

Chassis Type : WS-C4506-E

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model              Serial No.

---+-----+--------------------------------------+------------------+-----------

1     6  Sup 6-E 10GE (X2), 1000BaseX (SFP)     WS-X45-SUP6-E      JAE14400HOZ

3    18  10GE (X2), 1000BaseX (SFP)             WS-X4606-X2-E      JAE150303PE

4    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E    JAE151209V1

6    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E    JAE16110113

M MAC addresses                    Hw  Fw           Sw               Status

--+--------------------------------+---+------------+----------------+---------

1 e05f.b939.8480 to e05f.b939.8485 1.7 12.2(44r)SG5 12.2(53)SG2      Ok

3 503d.e595.ce94 to 503d.e595.cea5 1.2                               Ok

4 6400.f12b.1b61 to 6400.f12b.1b90 1.0                               Ok

6 442b.037a.3d4c to 442b.037a.3d7b 1.0                               Ok


Breeze Joseph Kuriakose Sr Network Engineer
2 Replies 2

Richard Atkin
Level 4
Level 4

Using one port with 10G SFP and a different port with the 2x 1G converter is fine... The answer to your question is 'yes'.

Sent from Cisco Technical Support iPad App

Hi Richard Thanks for the feedback.

i jut want to confirm

1>> If i use 1st port CVR-X2-SFP then can i use the 2 port X2-10GB-SR  or i should you in 3rd port .

2>>if first 4 ports are using CVR-X2-SFP then the remaining 2 ports can i use X2-10GB-SR

the line card is WS-X4606-X2-E

Breeze Joseph Kuriakose Sr Network Engineer
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: