Instructions for removing RFID CISCO 9500

[00upzsutpo22hIgwG5d6]

Hi, does anyone have instructions for removing the RFID module from the CISCO 9500 switch?

Thanks

[balaji.bandi]

as per I know it is a built-in switch,  you can not remove, but you can disable i guess - never tried - i will test this command later week on one of the switches,.

no location rfid status

[00upzsutpo22hIgwG5d6]

Hi, thanks for the command, but I need to remove the physical module from the ejector arm that is part of the system tray.  Does anyone have any instructions or tool suggestions?  

Thank You

[Leo Laohoo]

Please contact your Cisco AM/SE because physically removing the RFID will automatically void the warranty.

[00upzsutpo22hIgwG5d6]

Hi, does anyone have instructions for removing an RFID module from a CISCO 9500 switch?

Thanks

[balaji.bandi]

not that i am aware any community member can able to help here,. since you looking hardware remove which part of the deal. talk to cisco Rep or partner as suggested, not sure what is the reason for removing, people looking more feature, first time i am hearning removing the feature which protect assets here.

[jason_majie]

just unscrew it.... 

[jason_majie]

 

[balaji.bandi]

nice good luck,.!